Cork is an incredibly versatile natural material harvested from living cork oak trees somewhat like wool is gathered from sheep. The trees are unharmed by the process, and they continue producing cork for an average of 150 years.
Cork is composed of dead cells that accumulate on the outer surface of the cork oak tree. Because of its honeycomb-like structure, cork consists largely of empty space; its density (weight per unit volume) is one-fourth that of water. Unlike a honeycomb, however, cork consists of irregularly shaped and spaced cells having an average of 14 sides. With 625 millions of these empty cells per cubic inch (40 million per cubic centimeter), cork is like many layers of microscopic Bubble Wrap, making it an effective cushioning material. Its low density makes cork useful in products like life preservers and buoys. The large amount of dead-air space makes cork an effective insulation material for both temperature and noise. Furthermore, it is fire retardant; flames will only char the surface, and no toxic fumes are generated. Cutting the surface of cork turns many of the microscopic cells into tiny suction cups, creating an effective non-slip surface. In addition to being flexible, cork is highly resilient. After being crushed under a pressure of 14,000 lbs/in 2 (96,000 kPa), cork will regain 90% of its original size in 24 hours. Cork absorbs neither dust nor moisture, and it resists both rot and insects. Highly resistant to wear, it is used for polishing diamonds.
Among the many products made from cork are flooring materials (e.g., linoleum), shoe insoles, roofing panels, gaskets, safety helmet liners, bottle stoppers, dartboards, bulletin boards, and cores for golf balls and baseballs. Numerous artificial materials have been developed to substitute for cork in specific applications (e.g., a synthetic pea in a referee’s whistle, foam insoles for shoes, or Styrofoam life preservers). However, no general substitute has been developed for cork that can be used in diverse applications.
Recompiling, the Cork most distinguished and useful properties are: low density, resiliency, impermeability, insulating and fire retardant properties, low conductivity, high resistance to wear and tear, warm and soft touch and anti-static.
Cork bottle stoppers have been found in Egyptian tombs dating back thousands of years. Ancient Greeks used cork to make fishing net floats, sandals, and bottle stoppers. Two thousand years ago, Romans widely used cork in variety of ways, including life jackets for fishermen. For hundreds of years, Mediterranean cottages have been built with cork roofs and floors to keep out summer heat and winter cold and to provide a soft walking surface.
Glass bottles were invented in the fifteenth century, but their use did not become widespread until the seventeenth century. The popularity of cork as a stopper led to deliberate cultivation of cork trees, which prior to about 1760 had simply been harvested wherever they happened to grow. The revolutionary crown cap a metal lid lined with a disk of natural cork commonly known as a bottle cap was invented in 1892.
A great deal of the cork harvest was wasted until around 1890, when a German company developed a process for adding a clay binder to cork particles and producing sheets of agglomerated (composite) cork for use as insulation. The following year, an American named John Smith developed a technique for producing pure-cork agglomeration out of waste material by subjecting cork particles to heat and pressure without adding any binder. The next major development occurred in 1909 when Charles McManus invented a type of agglomerated cork that could be used to line crown caps. Since then, many other techniques have been developed to produce cork compounds with a variety of properties and uses.
The raw material for cork products is harvested from the cork oak tree (either the evergreen Quercus suber or the deciduous- Quercus occidentalis). The trees typically reach a height of 40-60 ft (12-18 m) and a trunk circumference of 6-10 ft (2-3 m). Virtually all of the world’s commercial cork trees grow in the western Mediterranean region and the Iberian Peninsula. Portugal’s cork forests are the most productive. Accounting for 30% of the existing trees, they produce half of the world’s harvested cork.
A cork tree is ready for its first harvest when it is about 20 years old. The first harvest is of poor quality, and can only be used to make agglomerated cork products. Subsequent harvests occur at nine-year intervals, when the cork layer reaches a thickness of 1-2 inch (2-5 cm). The harvest from a young tree yields about 35 lb (16 kg) of cork, while the yield for an older tree may be 500 lb (225 kg). Each tree has a productive life of about 150 years.
During the production of bottle stoppers, chemical baths are used to condition the corks. Among the more popular are a chlorinated lime bath followed by a neutralizing bath of oxalic acid, a hypochlorite bath neutralized by sodium oxalate, and a peroxide bath neutralized with citric acid.
Production of compound agglomerated cork involves adding a binder or adhesive agent to cork granules. Different binders are chosen, depending on the qualities desired in the ultimate product (e.g., flexibility, softness, resistance to wear). Among those frequently used are asphalt, rubber, gypsum, glue, and plastic.
Cork has been used since antiquity as a stopper for bottles because of its compressive abilities. During the Renaissance, cork stoppers were commonplace, and cork-oak trees were grown and processed in the Pyrenees Mountains especially for this purpose. Wine bottles were commonly sealed with oiled hemp. When Pierre Perignon (1638-1715) invented champagne in 1688, he found that the gaseous pressure inside his bottles blew out the hemp stoppers. To solve the problem, he invented corks held in place by wire.
The modern metal bottle cap was developed by the prolific Maryland inventor William Painter, who patented his first stopper in 1885. By 1891, his definitive design, a cork-lined metal cap with a corrugated edge that is crimped around the bottle lip, appeared. Painter called his invention the “crown cap,” founded the Crown Cork and Seal Company to market it, and became very wealthy from it.
The crown cap was the industry standard for nearly 80 years. In 1955, the crown cap’s cork liner was replaced by plastic, and a high-speed machine to inspect crown seals was introduced in 1958. In the 1960s, the Coca-Cola company offered lift-top crown caps. The push-on, twist-off cap was first developed for baby food. Screw caps for carbonated beverages appeared in the 1960s and 1970s and are the standard today.